Encuentra los diferentes desarrollos tecnológicos, invenciones, materiales, casos de éxito, proyectos de investigación, capacitación… desarrollados por el equipo de AZTERLAN.
Understanding compacted graphite iron solidification through interrupted solidification experiments
While the manufacture of compacted graphite (CG) iron castings has seen significant expansion over the recent years, the growth of
Effect of Cu, Mn and Sn on pearlite growth kinetics in as-cast ductile irons
In a previously published work, pearlite growth in cast irons was investigated and it was claimed that growth kinetics of
On the stable eutectic solidification of iron-carbon-silicon alloys
Extensive effort was expanded to elucidate the growth and morphology of the stable eutectic grains during early solidification of continuous
Microstructure of As-cast Ferritic-pearlitic Nodular Cast Irons
A review of past works on the formation of ferrite and pearlite in nodular cast iron is proposed. The effects
Un innovador sistema de predicción de defectos metalúrgicos en piezas de fundición, en tiempo real de fabricación
En las empresas de fundición es habitual la utilización de herramientas de simulación numérica, con el fin de reducir el
Study of Strontium fading in Al-Si-Mg and Al-Si-Mg-Cu alloy by thermal analysis
The production of high quality parts for automotive and aircraft industries requires both improved melt processing and effective control tools
New As-Cast Ductile Iron Raises Bar for Properties
Ductile iron has a wide range of mechanical properties, depending on its metallic matrix. The material can replace cast and
Effect of microstructure and casting defects on the mechanical properties of secondary AlSi10MnMg(Fe) test parts manufactured by vacuum assisted high pressure die casting technology
Primary AlSi10MnMg alloy is widely used for manufacturing of high ductility VPDC castings. This alloy combines low Fe with high
Processing Thickness Window for As-cast Ausferritic Castings
A process to obtain ausferritic as-cast microstructures through engineered cooling after solidification (without heat treatment) was developed in previous studies
Advanced Properties of Ausferritic Ductile Iron Obtained in As-Cast Conditions
Ductile iron casting production is strongly affected by austenite and graphite distribution obtained after the solidification process. At the same
Understanding Superfine Graphite Iron Solidification Through Interrupted Solidification Experiments
The tensile strength of near-eutectic gray iron can be increased from 230–300 to 300–345MPa, without a significant increase in hardness,
Comportamiento frente a la corrosión de fundiciones con grafito laminar y esferoidal parcialmente modificadas con silicio en NaCl 0,03 M
El uso creciente de fundiciones esferoidales en aplicaciones tecnológicas hace que se busquen nuevos métodos para mejorar su comportamiento frente
Enhancing the stationary state prediction in Model Predictive Control systems to avoid Dross defect in heavy-section foundries
A Model Predictive Control (MPC) is a system designed to control a production plant. These systems are composed by several
Advanced sustainable foundry – Carbon balance and carbon footprint in foundry processes and foundry product cycles
Carbon footprint analysis (CFA) is a sophisticated environmental method to evaluate the impact of the whole life-cycle of a product
Estabilidad austenítica de la fundición ADI en condiciones sub-cero
The use of Austempered Ductile Iron (ADI) in the manufacture of different types of components grows despite some limitations that
Caracterización de fractura en fundiciones de grafito esferoidal de última generación
Nearly all cast parts must undergo a machining process in order to be used in service. This work is exclusively