Comparison of hot craking susceptibility of TIG and laser beam welded alloy 718 by Varestraint testing

Reduced hot cracking susceptibility is essential to ensure the flawless manufacturing of nickel superalloys typically employed in welded aircraft engine structures. The hot cracking of precipitation strengthened alloy 718 mainly depends on chemical composition and microstructure resulting from the thermal story. Alloy 718 is usually welded in a solution annealed state. However, even with this thermal treatment, cracks can be induced during standard industrial manufacturing conditions, leading to costly and time-consuming reworking. In this work, the cracking susceptibility of wrought and investment casting alloy 718 is studied by the Varestraint test. The test is performed while applying different welding conditions, i.e., continuous tungsten inert gas (TIG), low frequency pulsed TIG, continuous laser beam welding (LBW) and pulsed LBW. Welding parameters are selected for each welding technology in order to meet the welding quality criteria requested for targeted aeronautical applications, that is, full penetration, minimum cross-sectional welding width and reduced overhang and underfill. Results show that the hot cracking susceptibility of LBW samples determined by the Varestraint test is enhanced due to extended center line hot cracking, resulting in a fish-bone like cracking pattern. On the contrary, the minor effect of material source (wrought or casting), grain size and pulsation is observed. In fact, casting samples with a 30 times coarser grain size have shown better performance than wrought material.

Autores/as:

Pedro Álvarez (LORTEK) Lexuri Vázquez (LORTEK), Noelia Ruiz (Alfa Investigación), Pedro Rodríguez (Alfa Investigación), Ana Magaña, Andrea Niklas, Fernando Santos.

Keywords:

Hot cracking; Ni superalloys; alloy 718; varestraint test; TIG welding; laser beam welding; grain size.

Atrás

¿Cómo podemos ayudarte?

Mantente informad@ de la actividad de AZTERLAN

¿En qué idioma quieres recibir la información?

Mantente informad@ de la actividad de AZTERLAN

¿En qué idioma quieres recibir la información?