AZTERLAN
Knowledge Hub
Encuentra los diferentes desarrollos tecnológicos, invenciones, materiales, casos de éxito, proyectos de investigación, capacitación… desarrollados por el equipo de AZTERLAN.
¿Qué buscas?
Desarrollos y capacidades:
Diseminación:
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
Influence of the Holding Time in the Heating/Pouring Unit on the Metallurgical Quality of Spheroidal Graphite Iron
The final metallurgical quality of a ductile iron is determined by the components of the metallic charge, as well as
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
New ductile cast iron digital grades for automotive components
This research paper demonstrate that new cast iron grade materials can be developed aided by an expert digital twin (manufacturing
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
Melt Treatment Optimization of 5XXX and 6XXX Alloys for Ablation Technology
Ablation technology is an emerging casting technology which presents several advantages associated to the high cooling rate that strongly modify
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
Towards the Prediction of Tensile Properties in Automotive Cast Parts Manufactured by LPDC with the A356.2 Alloy
Aluminum-silicon-magnesium alloys are commonly used in the automotive industry to produce structural components. Among usual quality controls of produced castings,
![](https://www.azterlan.es/wp-content/uploads/2023/05/Thermolan-cuchara.jpg)
Evolución del sistema de control y predicción en pieza mediante análisis térmico
En esta publicación abordamos las diversas funcionalidades de la herramienta de análisis térmico Thermolan® en las diferentes áreas del proceso
![Tren aterrizaje avión](https://www.azterlan.es/wp-content/uploads/2023/09/Tren-aterrizaje-avion-1024x506.jpg)
H2Free. Modelling of Hydrogen effusion in electrochemically plated ultra-high-strength-steels
Proyecto finalizado 0% 0 Fecha de inicio Clean Sky 2 Financiado por 101007712 grant agreement number 0 Fecha fin Los
![](https://www.azterlan.es/wp-content/uploads/2023/09/Turbina-avion.jpg)
ReINTEGRA. Innovative End of Life procedures for REcycling INTEGRAl welded Al-Li Aerostructures
Proyecto finalizado 0% 0 Fecha de inicio Clean Sky 2 Financiado por 886609 grant agreement number 0 Fecha fin Las
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
The effect of the substitution of Silicon by Aluminum on the properties of lamellar graphite iron
In cast iron, silicon and aluminum are elements that promote graphite precipitation and strengthen the alloy by solid solution. In
![](https://www.azterlan.es/wp-content/uploads/2023/09/Ala-avion-2-1024x678.jpg)
NEMARCO. New manufacturing routes (for NiCrSiFeB alloys) to replace cobalt in aircraft components.
Proyecto completado 0% 0 Fecha de inicio Clean Sky 2 Financiado por 101007948 grant agreement number 0 Fecha fin El
![fundición de grafito laminar](https://www.azterlan.es/wp-content/uploads/2022/03/fundicion-laminar-1024x846.jpg)
Al Gray Iron
Nuevo Material Fundición de Hierro Al Gray Iron Fundición gris con propiedades mecánicas mejoradas. Mayor resistencia con durezas moderadas Alta
![fabricación alto silicio](https://www.azterlan.es/wp-content/uploads/2022/03/alto-silicio-1024x832.png)
Fabricación industrial de piezas de fundición de hierro con alto silicio
Solución Fundición de Hierro Sistema de fabricación industrial fundición alto silicio Asegura una fabricación en serie sin defectos. Más información
![Ensayo de tomografía axial computerizada. Representación 3D de sanidad interna](https://www.azterlan.es/wp-content/uploads/2021/11/ensayos-de-caracterizacion-1024x683.jpg)
Tomografía Axial Computerizada
Ensayo destacado Tomografía Axial Computerizada Representación 3D de la integridad de componentes metálicos. Más infornación Explora el volumen total de
![Hot spot defects in different ductile iron castings and metallographic cross section of two hot spot holes](https://www.azterlan.es/wp-content/uploads/2022/03/Hot-spot-defects-in-different-ductile-iron-castings-and-metallographic-cross-section-of-two-hot-spot-holes.png)
Casting Defects in Sand-Mold Cast Irons—An Illustrated Review with Emphasis on Spheroidal Graphite Cast Irons
Cast irons are known to be easy to shape by sand casting due to their high eutectic fraction. Despite this
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
Probing the correlation between corrosion resistance and biofouling of thermally sprayed metallic substrata in the field
The correlation between inherent corrosion resistance and biofouling was investigated for five different metallic coatings. Steel panels thermally spray-coated with
![](https://www.azterlan.es/wp-content/uploads/2022/05/Maider_susie-4-1024x598.png)
Fabricación de herramientas de conformado con circuitos de refrigeración subcutáneos mediante laser cladding
En los procesos de fabricación de transformación de materiales metálicos, plásticos y cerámicos muchos de los eventos relevantes se dan
![](https://www.azterlan.es/wp-content/uploads/2023/01/paper-1024x603.jpg)
Tensile properties and fracture toughness at service temperatures of an optimized pearlitic ductile iron alloy for automotive crankshafts
Cast iron and forged steel have competed against each other for many years for different industrial applications. Crankshafts are one