Materials Science Forum (Vol. 765)
07/2013
10.4028/www.scientific.net/MSF.765.711
Aluminio, Ana Fernandez, Andrea Niklas, Asier Bakedano, Edurne Aguado, I+D+i, Materiales ligeros, Tecnologías de fundición, Urko Uribe
The necessity of preserving resources and to reduce environmental pollution makes light weight concepts highly interesting for the transportation market, with light weight being essential for newly developed electric and hybrid vehicles. However, some components cannot be replaced only by aluminium, but need to be combined with steel in order to achieve the desired mechanical characteristics. Therefore, there is great interest in developing processes to manufacture aluminium/steel hybrid structures that present a good bond. In the present work a range of processing conditions for improving the bond strength between S355J2H steel inserts and AlSi7Mg casting alloy were investigated. Before casting, different chemical, thermal and mechanical treatments were applied to the steel insert: As-received condition, preheating, shot blasting, pickling, hot dip aluminizing, hot dip galvanizing, zinc coating and nickel/copper plating. The steel/AlSi7Mg interfaces were characterized by optical microscopy (LOM), scanning electron microscopy (SEM) and x-ray diffraction (XRD). Special attention was paid to the presence of defects, formation of oxides and/or intermetallic phases in the reaction zone. The interface shear strength has been assessed by the push-out test, and the results have been correlated with microstructural observations at the interfaces. Combinations of different insert treatments were also investigated.
Edurne Aguado, Asier Bakedano, Urko Uribe, Ana Fernandez, Andrea Niklas
Aleación Al-Si, reacción de interfaz, resistencia al corte de interfaz, insertos de acero
¿Cómo podemos ayudarte?
Mantente informad@ de la actividad de AZTERLAN
Mantente informad@ de la actividad de AZTERLAN
Formamos equipos de trabajo en distintos ámbitos de la metalurgia y los procesos de transformación de metales.
Indícanos los datos de tu trabajo y nos pondremos en contacto contigo lo antes posible.
Comparte tu reto con nuestro equipo. Hablar no puede más que acercarnos un poco más a posibles soluciones.