Metalcasting congress
2023/11
B+G+i, Burdin-galdaketa, Doru Stefanescu, Galda teknologiak, Gorka Alonso, Gorka Zarrabeitia, Ramón Suarez, Rodolfo González-Martínez
High-silicon spheroidal graphite (SG) irons present significant challenges to the production of sound castings as it is particularly susceptible to significant shrinkage defects. The critical phase is the end of solidification when, as the amount of eutectic graphite generated decreases, graphite expansion may become insufficient to compensate the solidification shrinkage, increasing the risk of microshrinkage (microporosity) formation. The goal of this industrial research was to assess the efficiency of eight commercial inoculants in minimizing porosity occurrence in a 3.45%C, 3.75%Si SG iron. Metallographic analysis was conducted on the TA cups to evaluate the nodule count and size distribution. SEM analysis was used to study the type of nuclei, and tomography to quantify the amount of porosity in each TA cup. An attempt was made to correlate the graphite formation rate during eutectic solidification with the porosity level. Inoculants rich in Zr seem to produce the best results.
Gorka Alonso, Doru M. Stefanescu (Ohio State University & The University of Alabama), Jon Sánchez, Gorka Zarrabeitia, Ramón Suárez
silizio altuko burdin-galda, mikrouzkurtze, tomografia, inokulatzaile, nukleo, tamaina-banaketa
Nola lagun diezazukegu?
Mantente informad@ de la actividad de AZTERLAN
Mantendu AZTERLANeko berrien adi
Manten zaitez AZTERLANeko informazioez eguneratuta