• Berriak
  • Talentua
  • Webmail
  • Generic selectors
    Exact matches only
    Search in title
    Search in content
    Post Type Selectors

Advanced Properties of Ausferritic Ductile Iron Obtained in As-Cast Conditions

In previous studies, the process parameters to obtain ausferritic ductile iron in as-cast conditions by means of engineered cooling were defined, that is, without an austempering heat treatment. This material was fundamentally characterized, and its mechanical properties were determined. It was demonstrated that obtaining fully ausferritic microstructures by means of engineered cooling was feasible and that the properties met the requirements of the conventionally produced austempered ductile iron. Additionally, an experimental model was developed to define the optimal processing parameters of castings presenting different thermal moduli, in terms of chemical composition, temperatures and time parameters. The aim of the present work is to go into detail about the physical properties of the ausferritic as-cast materials. The chemical composition of the samples was defined by means of the experimental model. The isothermal transformation temperature was changed from 300 to 400 °C, while the other process parameters (shakeout temperature and isothermal transformation time) remained constant. Due to the excellent strength/toughness ratio of these materials, they are prone to being used on different applications such as automotive suspension components, rail components in low temperature environments and pumps and engines exposed to corrosive marine conditions among others. With the aim of responding to this demand, an advanced characterization of the material’s low temperature, corrosion or dynamic properties was performed on this work. These results were compared to the conventionally heat-treated austempered ductile iron as well as other nodular iron ferritic–pearlitic grades found in the literature.


Susana Méndez, Urko de la Torre, Rodolfo González-Martínez, Ramón Suárez.


As-cast ausferrite, fatigue, corrosion, mechanical properties, impact resistance, three-point bending test.


Nola lagun diezazukegu?

Mantente informad@ de la actividad de AZTERLAN

¿En qué idioma quieres recibir la información?

Mantendu AZTERLANeko berrien adi

Zein hizkuntzatan jaso nahi duzu informazioa?

Jarri kontaktuan Xabierrekin

Jarri kontaktuan Maider Muro-rekin.

Jarri kontaktuan Dr. Urko de la Torre-rekin.

Jarri kontaktuan Anna Regordosa-rekin

Jarri kontaktuan Dr. Rodolfo González-Martínez-ekin.

Jarri kontaktuan Ander Areitioaurtena-rekin.

Jarri kontaktuan David Aristondo-rekin.

Jarri kontaktuan Juan J. Bravo-rekin.

Jarri kontaktuan David Garcia-rekin.

Jarri kontaktuan Jose Ramon-rekin.

Jarri kontaktuan Oihana-rekin.

Manten zaitez AZTERLANeko informazioez eguneratuta

Zein hizkuntzatan jaso nahi duzu informazioa?