Centro de Investigación Metalúrgica

Publicaciones científicas del Centro de Investigación Metalúrgica IK4-AZTERLAN

“Material compuesto metálico para proteger contra proyectiles de alta velocidad e impactos de alta energía” R. Seddon, J. Maudes, A. Pérez-Márquez, N. Murillo, M. Herrán, J. Izaga, P. Venegas, I. Sáez de Ocáriz, A. I. Fernández, J. R. de la Fuente. Materiales Compuestos, vol. 12, nº. 4, pp. 1-4.

“Reexamination of crystal growth theory of graphite in iron-carbon alloys” D.M. Stefanescu, G. Alonso, P. Larrañaga, E. De la Fuente, R. Suarez. Acta mater., vol.139, pp. 109-121, 2017.

“Combined effects of cooper and tin at intermediate level of manganese on the structure and properties of as-cast nodular graphite cast iron” J. Lacaze, J. Sertucha, P. Larrañaga, R. Suárez. Arch. Metall. Mater. 62, vol. 2, pp. 825-831. 2017.

“Mechanical and microstructural characterization of HIP joints of asimplified prototype of the ITER NHF First Wall Panel” N. Ordás, F. Samaniego, I. Iturriz, A. Gómez, C. Escudero, A. I. Fernández-Calvo, I. Cobo, S. Banetta, S. Heikkinen, T. Cicero. Fusion Engineering and Design. Junio 2017. 

“Statistical Study to Evaluate the Effect of Processing Variables on Shrinkage Incidence During Solidification of Nodular Cast Irons” J. M. Gutiérrez, A. Natxiondo, J. Nieves, A. Zabala y J. Sertucha. Metallurgical and Material Transactions A, pp. 1-14, April 2017.

“Advanced Properties of Ausferritic Ductile Iron Obtained in As-Cast Conditions” S. Méndez, U. de la Torre, R. González- Martínez, R. Suárez. International Journal of Metalcasting, vol. 11, Issue 1, pp. 116-122, enero 2017. ISSN 1939-5981.

“Austempered Ductile Iron (ADI) Alternative Material for High-Performance Applications”, G. Artola, I. Gallastegi, J. Izaga, A. Rimmer. International Journal of Metalcasting · , vol. 11, pp. 131-135, Enero 2017.

“Kinetics of Nucleation and Growth of Graphite at Different Stages of Solidification for Spheroidal Graphite Iron”, G. Alonso, P. Larrañaga, D. M. Stefanescu, E. De la Fuente, A. Natxiondo, R. Suárez. International Journal of Metalcasting, vol. 11, Issue 1, pp. 14–26, January 2017.

“On the Nucleation of Graphite in Lamellar Graphite Cast Iron”, G. Alonso, P. Larranaga, E. de la Fuente, DM. Stefanescu, R. Suárez. Transactions of the American Foundry Society, vol. 124, pp.205-213, 2016.

“Chunky graphite formation in ductile cast irons: effect of silicon, carbon and rare earths”, U. de la Torre, J. Lacaze, J. Sertucha. International Journal of Materials Research, vol. 107, Issue 11, pp. 1041–1050, November 2016.

“Microstructure and Mechanical Properties of a New Secondary AlSi10MnMg (Fe) Alloy for Ductile High Pressure Die Casting Parts for the Automotive Industry”, A. Niklas, A. Baquedano, S. Orden, E. Noguès, M. Da Silva, A.I. Fernández-Calvo. Key Engineering Materials, vol. 710, pp. 244-249, 2016.

“Active Mg Estimation Using Thermal Analysis: A Rapid Method to Control Nodularity in Ductile Cast Iron Production” R. Suárez, J. Sertucha, P. Larrañaga, J. Lacaze, Metallurgical and Materials Transactions B, vol. 47 (5), pp. 2744–2753, October 2016.

A new secondary AlSi10MnMg (Fe) Alloy suitable for manufacturing of ductile Aluminium parts by vacuum assisted high pressure die casting technology, A. Niklas, A.I. Fernández-Calvo, A. Bakedano, S. Orden, M. da Silva. METALLURGIA ITALIANA, Issue: 6, pp. 17-20, Junio 2016.

“Statistical study to determine the effect of carbon, silicon, nickel and other alloying elements on the mechanical properties of as-cast ferritic ductile irons”. J. Lacaze, J. Sertucha, P. Larrañaga, R. Suárez. Revista de Metalurgia, vol. 52(2), pp. Abril- Junio 2016.

“On the Crystallization of Compacted and Chunky Graphite from Liquid Multicomponent Iron-Carbon-Silicon-Based Melts”. D.M. Stefanescu, R. Huff, G. Alonso, P. Larrañaga, E. De la Fuente, R. Suárez. Metallurgical and Materials Transactions A, vol. 47A, Issue: 8, pp. 4012-4023, Agosto 2016.

“Investigation of Thermal and Mechanical Properties of Quenchable High-Strength Steels in Hot Stamping”. A. Gorrino, C. Angulo, M. Muro, J. Izaga. Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, vol. 47 (3), pp. 1527-1531, Junio 2016. 

“Effect of solution heat treatment on gas porosity and mechanical properties in a die cast step test part manufactured with a new AlSi10MnMg(Fe) secondary alloy”. A. Niklas, S. Orden, A. Bakedano, M. da Silva, E. Nogués, A.I. Fernández-Calvo, Materials Science and Engineering: A, vol. 667, pp. 376–382, Junio 2016. 

“On the crystallization of graphite from liquid iron-carbon-silicon Melts”. D.M. Stefanescu, G. Alonso, P. Larrañaga, E. De la Fuente, R. Suárez. Acta Materialia, vol. 107, pp. 102–126, Abril 2016.

“Solidification of Superfine Graphite Iron Revealed by Interrupted solidification Experiments”. G. Alonso, D.M. Stefanescu, P. Larrañaga, E. de la Fuente, E. Aguado, R. Suárez. International Journal of Cast Metals Research, vol. 29, Issue: 5, pp. 258-265, 2016

“Understanding compacted graphite iron solidification through interrupted solidification experiments”. G. Alonso, D. M. Stefanescu, P. Larrañaga, R. Suárez. International Journal of Cast Metals Research, vol. 29 (1-2), pp. 2-11, 2016, Special Issue featuring papers from SPCI10.

“Effect of Cu, Mn and Sn on pearlite growth kinetics in as-cast ductile irons”, J. Lacaze, J. Sertucha, International Journal of Cast Metals Research 29 (1-2), pp. 73-77, February 2016, 

“Microstructure of As-cast Ferritic-pearlitic Nodular Cast Irons”, J. Lacaze, J. Sertucha,·L. MagnussonÅberg. ISIJ International 56(9), pp. 1606-1615, Jan 2016.

“On the stable eutectic solidification of iron-carbon-silicon alloys”. D.M. Stefanescu, G. Alonso, P. Larranaga, R. Suárez. ACTA MATERIALIA, vol. 103, pp. 103-114, Enero 2016.

“New as-cast ductile iron raises bar for properties”, S. Méndez, U. de la Torre, P. Larranaga, R. Suárez, D.M. Stefanescu. Modern Casting, pp. 39-44, Sept/Oct 2015.

”New as-cast ductile iron raises bar for properties”, S. Méndez, U. de la Torre, P. Larranaga, R. Suárez, D.M. Stefanescu. Metal Casting Design & Purchasing, pp. 39-44, Sept/Oct 2015.

“Understanding Superfine Graphite iron solidification through interrupted solidification experiments.”, G. Alonso, D.M. Stefanescu, P. Larrañaga, E. de la Fuente, E. Aguado, R. Suárez. Book: Advances in the Science and Engineering of Casting Solidification: An MPMD Symposium Honoring Doru Michael Stefanescu, TMS 2015 (The Minerals Metals & Materials Society). ISBN: 978-1-119-08238-5, pp. 347-454, 2015.

"Processing Thickness Window for As-cast Ausferritic Castings”, S. Méndez, U. de la Torre, R. Suárez, P. Larranaga, D.M. Stefanescu. AFS Proceedings, vol. 15-010, pp.1-7, 2015.

“Un innovador sistema de predicción de defectos metalúrgicos en piezas de fundición, en tiempo real de fabricación”. R. Suárez, J.M. Gutiérrez, A. Baquedano, P. Larrañaga, A. Natxiondo, G. Zarrabeitia, J. Sertucha. FundiPress Noviembre 2015, pp. 32-37, 2015.

“Effect of microstructure and casting defects on the mechanical properties of secondary AlSi10MnMg(Fe) test parts manufactured by vacuum assisted high pressure die casting technology”. A. Niklas, A. Bakedano, S. Orden, M. da Silva, E. Nogués, A.I. Fernández-Calvo. Materials today proceedings., vol. 2 (10) Part A, pp. 4931-4938, 2015. Aluminium Two Thousand World Congress and International Conference on Extrusion and Benchmark ICEB 2015, ISSN 2214-7853

“Study of Strontium fading in Al-Si-Mg and Al-Si-Mg-Cu alloy by thermal analysis”. S. Eguskiza, A. Niklas, A.I. Fernández-Calvo, F. Santos, M. Djurdjevic. International Journal of Metalcasting, vol. 9 (3), pp. 43-50, 2015.

“Graphite and Solid Fraction Evolutions during Solidification of Nodular Cast Irons”. A. Natxiondo, R. Suárez, J. Sertucha, P. Larrañaga. Metals, vol. 5 (1), ISSN 2075-4701, pp. 239-255, 2015. 

“Comportamiento frente a la corrosión de fundiciones con grafito laminar y esferoidal parcialmente modificadas con silicio en NaCl 0,03 M”. M. A. Arenas, A. Niklas, A. Conde, S. Méndez, J. Sertucha y J. de Damborenea. Revista de Metalurgia, vol. 50, 2014.

“As-cast high silicon ductile irons with optimised mechanical properties and remarkable fatigue properties”. U. de la Torre, A. Loizaga, J. Lacaze y J. Sertucha. Mater. Sci. Technol., vol. 30, pp. 1425-1431. 2014.

“Kinetics of graphite expansion during the solidification of lamellar and spheroidal graphite iron”. G. Alonso, D.M. Stefanescu, R. Suárez, A. Loizaga, G. Zarrabeitia. AFS 8-11 Abril 2014, Schaumburg, Illinois, USA.

“Effect of Carbon Equivalent and Alloying Elements on the Tensile Properties of Superfine Interdendritic Graphite Irons”. E. Aguado, D.M. Stefanescu, J. Sertucha, P. Larrañaga, R. Suárez. AFS Proceedings, vol. 14-009, pp. 1-10, 2014.

“Kinetics of graphite expansion during eutectic solidification of cast iron”. G. Alonso, D.M. Stefanescu, R. Suárez, A. Loizaga, G. Zarrabeitia. International Journal of Cast Metals Research, vol.27 nº.2, pp. 87-100, 2014

”Fabricación de piezas de fundición con grafito esferoidal en molde Metálico”. A. Urrestarazu, J. Sertucha, R. Suárez, I. Álvarez-Ilzarbe. Revista de Metalurgia, vol. 49 (5), pp. 325-339, 2013.

“Estructuras ausferríticas mediante enfriamiento controlado”. U. de la Torre, S. Mendez. Fundipress, vol. 51, pp. 40-42, 2013.

“As Cast ductile iron Crankshafts with improved mechanical properties”. A. Monzon-Gracia, J. Sertucha-Perez, J. Serrallach-Perarnau, R. Suárez-Creo. DYNA, vol.88 (5), pp. 529-535, 2013.

“Redistribution and Effect of Various Elements on the Morphology of Primary Graphite in Cast Iron”. J. Lacaze, N. Valle, K. Theuwissen, J. Sertucha, B. El Adib, L. Laffont. Advances in materials science and engineering Article Number:638451. Published, 2013.

“Un metodo rapido di simulazione per valurate la formazione dei microcavitá da ritiro in pezzi di ghisa sferoidale tenendo conto della quealitá del metallo e delle variabili del processo”. R. Suárez, J.M Gutierrez, G. Alonso, J. Sertucha. Industria Fusoria, vol.1, pp. 54-58, 2013.

“An Overview of Research Activities at IK4-Azterlan and Recent Technologies”. G. Zarrabeitia, R. Suárez. International Journal of Metal Casting, vol. 7, Issue 3, pp. 51-55, 2013.

“Investigation on the Effect of Sulfur and Titanium on the Microstructure of Lamellar Graphite Iron”. E. Moumeni, D.M. Stefanescu, N.S. Tiedje, P. Larrañaga, J.H. Hattel. The Minerals, Metals & Materials Society and ASM International, vol. 44A, pp. 5134-5146, 2013.

“Study of the Effect of Cooling Rate on Eutectic Modification in A356 Aluminium Alloys”. D. Ferdian, J. Lacaze, I. Lizarralde, A. Niklas, A.I. Fernández-Calvo. Materials Science Forum, vol. 765, pp. 130-134, 2013.

“Comparative Study of Different Interfaces of Steel inserts in Aluminium Castings”. E. Aguado, A. Baquedano, U. Uribe, A.I. Fernández-Calvo, A. Niklas. Materials Science Forum, vol. 765 pp. 711-715, 2013.

“Effect of the Thermal Modulus and Mould Type on the Grain Size of AlSi7Mg Alloy”. I. Lizarralde, A. Niklas, A.I. Fernández-Calvo, J. Lacaze. Light Metals 2013 (Ed. by B. A. Sadler), John Wiley & Sons, Inc., Hoboken, NJ, USA, pp. 327-331, 2013.

“Statistical Analysis of the Influence of Some Trace elements on Chunky Graphite Formation in Heavy Section Nodular Iron Castings”. J. Sertucha, J. Lacaze, S. Armendariz, P. Larrañaga. Metallurgical and Materials Transactions A., vol. 44, nº. 3, pp. 1159-1162, 2013.

“Critical temperature range in standard and Ni-bearing spheroidal graphite cast irons”. R.M. Ghergu, J. Sertucha, Y. Thebault, J. Lacaze. ISIJ Int., vol. 52, pp. 2036-2041, 2012.

“An experimental methodology based on solidification curves for controlling the manufacture of compacted graphite irons”. A. Loizaga, P. Larrañaga, I. Asenjo, J. Sertucha, R. Suárez. AFS Trans. vol.120, nº. 12-006, 2012.

“Gray Cast iron with high austenite to eutectic ratio. Part III. High strength, low hardness, high carbon equivalent gray iron with superfine graphite”. P. Larrañaga, J. Sertucha, A. Loizaga, R. Suárez, D.M. Stefanescu. AFS Trans, vol.120, nº.12-035, 2012.

“Gray cast iron with high austenite-to.eutectic ratio. Part II. Increasing the austenite-to eutectic ratio trough inoculation”. P. Larrañaga, J. Sertucha, A. Loizaga, R. Suárez, D.M. Stefanescu. AFS Trans. vol.120, nº. 12-034, 2012.

“Gray cast iron with high austenite to eutectic ratio. Part I. Calculation and experimental evaluation of the fraction of primary austenite in cast iron”. G. Alonso, D.M. Stefanescu, P. Larrañaga, J. Sertucha, R. Suárez. AFS Trans, vol.120, nº. 12-033, 2012.

“Influence of wt.% addition of Ni on the structural and mechanical properties of ferritic ductile irons”. J. Lacaze, P. Larrañaga, I. Asenjo, R. Suárez, J. Sertucha. Materials Science and Technology, vol. 28, nº. 5, pp. 603-608, 2012.

“Experimental evidence of metallurgical modification associated to chunky graphite in heavy section ductile iron castings”. J. Lacaze, S. Méndez, J. Sertucha, P. Larrañaga, R. Suárez, I. Ferrer. Int. J. Metalcast. vol. Winter6, pp.35-42, 2012.

“Effect of alloying on mechanical properties of as-cast ferritic nodular cast irons”. J. Sertucha, J. Lacaze, J. Serrallach, R. Suárez, F. Osuna. Mater.Sci. Technol, vol. 28, nº. 2, pp.184-191, 2012.

“Effect of various dopant elements on primary graphite growth”. N. Valle, K. Theuwissen, J. Sertucha, J. Lacaze. The 3rd International Conference on Advances in Solidification Processes. June 7-10, 2011. IOP Publishing. IOP Conf. Series. Y publicado Materials Science and Engineering, vol. 27, Articulo 012026, 2012.

“Relationship between casting modulus and grain size in cast A356 aluminium alloys”. A. Niklas, U. Abaunza, A.I. Fernández-Calvo, J. Lacaze. 3rd International Conference on Advances in Solidification Processes. IOP Publishing.IOP Conf. Series: Materials Science and Engineering, vol. 27, nº. 012003. Rodulc Abbey, The Netherlands, 2012.

“Improved Analytical Method for Chemical Analysis of Cast Irons Application to Castings with Chunky Graphite”. S. Mendez, D. Lopez, I. Asenjo, P. Larrañaga, J. Lacaze. ISIJ International, vol. 51, nº. 2, pp. 242–249, 2011.

“Formación de grafito chunky en piezas de pequeño espesor fabricadas utilizando fundición de hierro con grafito esferoidal”. I. Asenjo, P. Larrañaga, J. Sertucha. Revista de Metalurgia, vol. 47, pp. 402-411, 2011.

“Microstructure investigation of small section nodular iron castings with chunky graphite”. I. Asenjo, J. Lacaze, P. Larrañaga, S. Mendez, J. Sertucha, R. Suárez. Key Engineering Materials, vol. 457, pp. 52-57, 2011.

“Effect of selected alloying elements on mechanical properties of pearlitic nodular cast irons”. J. Serrallach, J. Lacaze, J. Sertucha, R. Suárez, A. Monzón. Key Engineering Materials, vol. 457, pp. 361-366, 2011.

“Influencia de la composición química de diferentes chatarras de acero sobre las propiedades mecánicas de la fundición con grafito esferoidal”. I. Asenjo, P. Larrañaga, J. Garay, J. Sertucha. Revista de Metalurgia, vol. 47 (4), pp. 307-318. 2011.

“Thermal analysis as a microstructure prediction tool for A356 aluminium parts solidified under various cooling conditions“. A. Niklas, U. Abaunza, A.I. Fernández-Calvo, J. Lacaze, R. Suárez. China Foundry, vol.8 (1), pp.89-95, 2011.

“Mechanical properties optimization of alloys AlSi7Mg casting in sand moulds”. A. Loizaga, E. De la Fuente, A. Niklas, J. Barrenengoa, A.I. Fernández-Calvo. Revista de Metalurgia, vol. 46, pp. 64-70, 2010.

“Design of a mould for the study of the relationship between thermal analysis results and microstructure of aluminium alloy A357 in investment casting”. Y. Bilbao, M. Espinosa, G. Artola, A.I. Fernández-Calvo, P.P. Rodríguez. Revista de Metalurgia, vol. 46, pp, 71-77, 2010.

“Estudio Térmico y estructural del proceso de solidificación de fundiciones de hierro con grafito laminar”. P. Larrañaga, J. Sertucha. Revista de Metalurgia, vol.46, pp. 370-380, 2010.

“Thermal analysis as a microstructure prediction tool for A356 aluminium parts solidified under various cooling conditions”. A. Niklas, U. Abaunza, A.I. Fernández-Calvo, J. Lacaze, R. Suárez. FOUNDRY, vol.59, nº.11, pp. 1167-1171, 2010.

“Experimental investigation on the effect of copper upon eutectoid transformation of as-cast and austenitized spheroidal graphite cast iron”. J. Sertucha, P. Larrañaga, J. Lacaze, M. Insausti. International Journal of Metalcasting, vol. Winter 2010, pp. 51-58, 2010.

“Effect of Carbon Equivalent on Graphite Formation in Heavy-Section Ductile Iron Parts”. J. Lacaze, S. Armendariz, P. Larrañaga, I. Asenjo, J. Sertucha, R. Suárez. Materials Science Forum vol. 636-637, pp. 523-530, 2010.

“Influencia de diferentes productos inoculantes sobre el poder de nucleación y la tendencia a la contracción de la fundición con grafito esferoidal”. R.Suárez, J.M. Gutiérrez, A.Loizaga, P. Larrañaga, J. Sertucha. Revista de Metalurgia, vol. 45 (5), pp. 339-350, 2009.

“Control del contenido de carbono a lo largo del proceso de fabricación de discos de freno de alto carbono”. U. Muruzábal, C. Nava, C. Ruiz, I. Asenjo, P. Larrañaga, R. Suárez. Revista Fundipress, vol. 9, pp. 46-50, 2009.

“Effect of antimony and cerium on the formation of chunky graphite during solidification of heavy-section castings of near-eutectic spheroidal graphite irons”. P. Larrañaga, I. Asenjo, J. Sertucha, R. Suárez, I. Ferrer y J. Lacaze. Metall. Mater. Trans. A, vol. 40A, pp. 654-661, 2009.

“Thermal analysis of the formation of chunky graphite during solidification of heavy-section spheroidal graphite iron parts”. J. Sertucha, R. Suárez, I. Asenjo, P. Larrañaga, J. Lacaze, I. Ferrer, S. Armendariz. ISIJ Int., vol. 49(2), pp. 220-228, 2009.

“Thermal analysis applied to estimation of solidification kinetics of Al-Si aluminium alloys”. A. Loizaga, A. Niklas, A.I. Fernández-Calvo and J. Lacaze. International Journal of Cast Metal Research, vol. 22 (5), 345-352, 2009.

“Comparison of thermal analysis and differential thermal analysis for evaluating solid fraction evolution during solidification of Al-Si alloys”. A. I. Fernández-Calvo, A. Niklas, J. Lacaze. TA-DTA Miskolk, 2008. Materials Science Forum 649 (2010) pp. 493-498. Trans Tech Publications. Switzerland, 2009.

“Effect of antimony on the eutectic reaction of heavy-section spheroidal graphite castings”. P. Larrañaga, I. Asenjo, J. Sertucha, R. Suárez, J. Lacaze. Proc. 2nd International Conference on Advances in Solidification Processes, pp. 83, 2008 y publicado en International Journal of Cast Metals Research, vol. 22(1-4), pp. 192-195, 2009.

“Moulage en fonte: outils avancés de prévision, de contrôle process et de gestion de compétences“. A. Zabala, R. Suárez, J. Izaga. Hommes et fonderie ISSN 0018-4357 CODEN HFONDM., nº. 388, pp. 26-37, 2008.

“Desarrollo de un software para la predicción de la densidad grafítica y el riesgo de formación de Grafito Chunky en piezas de módulo térmico elevado”. I. Ferrer, S. Armendariz, M. Mancisidor, I. Asenjo, P. Larrañaga, J. Sertucha y R. Suárez. Fundipress, vol. 9, pp. 46-50, 2008.

“Advanced predictions tools, foundry process control and knowledge management for irons castings”. A. Zabala, R. Suárez, J. Izaga. Foundry The Journal of the Institute Cast Metals Engineers, vol. 181, nº. 3653, April 2008.

“Influencia de los tratamientos realizados con diferentes ferroaleaciones de magnesio en la evolución de la calidad metalúrgica y los procesos de solidificación de las fundiciones esferoidales”. A. Loizaga, J. Sertucha, R. Suárez, Revista de Metalurgia, vol. 44(5), pp. 432-446, 2008.

“A computer aided system for melt quality and shrinkage propensity evaluation based on the solidification process of ductile iron”. P. Larrañaga, J.M. Gutiérrez, A. Loizaga, J. Sertucha, R. Suárez, AFS Transactions, vol.116. pp.547-561, 2008.

“Defectos metalúrgicos generados por la presencia de gases en el metal fundido”. A. Loizaga, J. Sertucha, R. Suárez, Anales de la Real Sociedad Española de Química, vol. 104(2), pp. 111-119, 2008.

“Effect of mould inoculation on the formation of chunky graphite in heavy-section spheroidal graphite cast iron parts”. I. Asenjo, P. Larrañaga, J. Sertucha, R. Suárez, J.M. Gómez, I. Ferrer, J. Lacaze, International Journal of Cast Metals Research, vol. 20(6), pp. 319-324, 2007.

“Influencia de las condiciones de moldeo y las características de los moldes sobre la formación de defectos de contracción en piezas de fundición esferoidal”. J. Sertucha, R. Súarez, J. Legazpi, P. Gacetabeitia, Revista de Metalurgia, vol. 43, pp.188-195, 2007.

“Prediction of Solid State Structure based on Eutectic and Euctectoid Transformation Parameters in Spheroidal Graphite Irons”. J. Sertucha, R. Suárez, J. Izaga, “International Journal of Cast Metal Research, vol. 19(6), pp. 315-322, 2006.

“Análisis del Proceso de Solidificación en Fundiciones Grafíticas Esferoidales”. P. Larrañaga, J. Sertucha, R. Suárez, Revista de Metalurgia, vol. 42(4), pp. 244-255, 2006.

“Materiales Inorgánicos Aplicados en la Fabricación de Piezas de Fundición”. J. Sertucha, R. Suárez, Anales de Real Sociedad Española de Química, vol. 101, pp.17-27, 2005.

“Magneto-structural studies and termal analysis of n-ethylpyridinium (m=2,3,4) tetrabromocuprate (II)complexes”. A. Luque, J. Sertucha, O. Castillo, P. Román. Polyhedron, vol.21, pp.19-26, 2002.

“Crystal packing and physical properties of pyridinium tetrabromocuprate(II) complexes assembled via hydrogen bonds and aromatic stacking interactions” A. Luque, J. Sertucha, O. Castillo, P. Román. New J. Chem, vol. 25, pp.1208-1214, 2001.

“Synthesis, cristal structure, and magnetic properties of an one-dimensional polymeric Cooper (II) complex containing an unusual 1,1’-bicoordinated oxalato bridge”. O. Castillo, A. Luque, J. Sertucha, P. Román, F. Lloret. Inorg. Chem, vol. 39, pp. 6142-6144, 2000.

“Ferromagnetic coupling through a carbonate bridge in the Cooper (II) chain [Cu(CO3)(4-apy)2] H2O(4-apy=4-aminopyrididne)”. J. Sertucha, A. Luque, O. Castillo, P. Román, F. Lloret,M.Julve Inorg. Chem. Commun, vol.2, pp. 14-16, 1999.

“Synthesis, chemical characterization, X-Ray cristal structure and magnetic properties of oxalato-bridged Cooper(II) binuclear complexes with 2,2’-bipyridine and diethylenetriamine as peripheral ligands” O. Castillo, I. Muga, A. Luque, J. Gutierrez-Zorrilla, J. Sertucha, P. Vitoria, P. Román. Polyhedron, vol.18, pp. 1235-1245, 1999.

“Crystal structure, magnetic properties and ESR studies of (4-apyH) 4 [Cu IIBr4][Cu1Br2]2:a novel Cu (II)/Cu (I) system containing bromocuprate (I) chains and isolated tetrabromocuprate (II) anions”. J. Sertucha, A. Luque, F. Lloret, P. Román. Polyhedron, vol.17, pp.3875-3880, 1998.

“Synthesis, characterisation and cristal structure of2-aminopyridinium (2-amino-5bromopyridine) tribromocuprate (II) and bis (2-aminopyridinium) tetrabromocuprate (II)”. A. Luque, J. Sertucha, L. Lezama, P. Román, J. Chem. Soc., Dalton Trans. pp. 847-854, 1997.

“Magneto-structural studies and thermal analysis of the 4-aminopyridinium tetrabromocuprate (II) monohydrate”. P. Román, J. Sertucha, A. Luque, L. Lezama, T. Rojo. Polyhedron. vol. 15. pp. 1253-1262, 1996.